PIC16F15214 MCU Overview
The PIC16F15214 is an cost effective upgrade from the PIC10F322. This MCU will give you two more I/O pins compared to the PIC10F322 – About 14 times the flash program space, 8x the SRAM space, and various other peripherals such as I2C, EUSART, and SPI.
The PIC16F15214 is also can be used if you need more program space and SRAM – compared to the PIC16F15213. The PIC16F15213 only have 3.5K Program Space, and 256 bytes SRAM – while the PIC16F15214 has 7K Program Space and 512 Bytes SRAM.
The PIC16F15214:
- Is an 8pin Device – with 6 I/O Pins {Two pins are used for power supply}
- Most Pin functions are mappable
- 1x External Interrupt Pin
- 6x Interrupt-on-change pins – IOC
- Operating Voltage Range: 1.8V to 5.5V
- Max CPU Speed 32Mhz
- Internal or External Clocking
- Has 7K of Program Flash Memory
- 512 Bytes of SRAM
- Has Memory Access Partition
- Has Device Information Area
- Timers
- 1x 8 bit timer
- 2x 16 bit timers
- PWM and CCP
- 2X PWM
- 2X CCP
- ADC Analog to Digital Converts
- 1 ADC 10bit Converter
- 5x ADC Channels
- Has 1x MSSP – Host Synchronous Serial Port (I2C / SPI modes)
- Has 1x EUSART – Enhanced Universal Synchronous Asynchronous Receiver Transmitter
- Has Watchdog Timer
- Programming and In-Circuit Debug
- Supports In-Circuit Serial Programming and In-Circuit Debug (VIA two Pins)
Have a Creative or Technical Project in Mind?
Looking for guidance, insights, or a fresh perspective on your technical or creative journey? Or just somebody to chat with?
Reach Out
jamie@jamiestarling.com